8:30am - 5:30pm (CST) MONDAY - FRIDAY
Integrity Furniture
Mobile Staging - Hardboard
Item #: Hardboard
Manufacturer: Midwest Folding Products
From compact storage to event location, mobile tables save set-up time and increase facility flexibility.
Midwest Mobile Staging - Hardboard
Mobile Staging (Hardboard) Pricing
| Item Number | D x L | Height | Weight | List Price | Price 1-5 ea. | Price 6-12 ea. | Price 13+ ea. |
|---|---|---|---|---|---|---|---|
| #MS08H | 4’ x 8’ | 8" | 179 | $1,799.70 | $1,035.00 | $1,017.00 | Quote |
| #MS16H | 4’ x 8’ | 16" | 206 | $1,898.30 | $1,092.00 | $1,073.00 | Quote |
| #MS24H | 4’ x 8’ | 24" | 224 | $1,932.50 | $1,112.00 | $1,092.00 | Quote |
| #MS32H | 4’ x 8’ | 32" | 238 | $2,040.40 | $1,174.00 | $1,153.00 | Quote |
| #MSW08H | 6’ x 8’ | 8" | 228 | $2,438.10 | $1,402.00 | $1,378.00 | Quote |
| #MSW16H | 6’ x 8’ | 16" | 256 | $2,569.70 | $1,478.00 | $1,452.00 | Quote |
| #MSW24H | 6’ x 8’ | 24" | 281 | $2,618.50 | $1,506.00 | $1,480.00 | Quote |
| #MSW32H | 6’ x 8’ | 32" | 292 | $2,760.80 | $1,588.00 | $1,560.00 | Quote |
Pie Shape Units are not Mobile
Pie Shaped Staging Sections (Hardboard) Pricing
| Item Number | Depth | Height | Weight | List Price | Price 1-5 ea. | Price 6-12 ea. | Price 13+ ea. |
|---|---|---|---|---|---|---|---|
| #PI3608H | 3’ | 8" | 33 | $287.80 | $163.00 | $158.00 | Quote |
| #PI3616H | 3’ | 16" | 58 | $390.70 | $221.00 | $214.00 | Quote |
| #PI3624H | 3’ | 24" | 86 | $531.70 | $301.00 | $291.00 | Quote |
| #PI3632H | 3’ | 32" | 140 | $926.30 | $523.00 | $507.00 | Quote |
| #PI4808H | 4’ | 8" | 40 | $317.30 | $180.00 | $174.00 | Quote |
| #PI4816H | 4’ | 16" | 86 | $453.60 | $256.00 | $249.00 | Quote |
| #PI4824H | 4’ | 24" | 163 | $910.50 | $514.00 | $499.00 | Quote |
| #PI4832H | 4’ | 32" | 190 | $981.30 | $554.00 | $537.00 | Quote |
Freight charges NOT included. Call us for shipping costs.
Midwest Mobile Staging - Hardboard
ALL Stage Surfaces
This is a digital representation of the of our product. Actual colors may differ slightly from what is displayed. Samples are available upon request.
Midwest Mobile Staging - Hardboard
Midwest Mobile Staging units offer the best value on the market today. Platforms and concert stage models accommodate your event or performance needs. They may be ordered in the same height to assemble a concert stage, or in up to five different heights to construct seated band or choral risers.
Mobile Stages fold, stack and store in less than two inches in height. Dual height models of each concert stage allow easy conversion from seated risers to performing concert stages when needed. Portable stages are constructed of heavy gauge steel and laminated plywood core decking for unsurpassed safety and durability, with your choice of deck finishes: hardboard, carpet or polypropylene.
This is a digital representation of the of our product. Actual colors may differ slightly from what is displayed.
Midwest Mobile Staging - Hardboard
CAPACITY
All units must be designed to carry a uniform live load of at least 200 lbs. per square foot. Written laboratory test data must be submitted on request.
PORTABILITY
The stage system shall be capable of being completely set-up and dismantled quickly, without special tools, by two persons of average physical strength.
CONSTRUCTION DECKING
A solid, plywood core shall be surfaced with one of the following:
- OPTION 1: 1/8" thick tempered hardboard
- OPTION 2: polypropylene sheet
- OPTION 3: carpet.
The decking shall measure at least ¾" in thickness. The perimeter of the decking shall be routed to allow the frame to fit flush with the top surface and cover the edges of carpeting.
FRAME
A 16 gauge, formed steel channel, 1-13/16" high shall be reinforced with a 16 gauge steel angle welded to the inside of the channel. The angle shall provide a continuous support to which the decking is secured with screws placed a maximum of 9" apart. The frames shall completely enclose the top, bottom and edges of the decking perimeter preventing the decking and any specified covering from becoming loose or damaged. All areas where frame members are joined together shall be reinforced with steel plates attached with rivets.
LEG STRUCTURE (Fixed Height)
Each leg assembly shall be constructed of 1.05" diameter, 14 gauge steel tubing capped at the point of floor contact with high impact plastic glides. The vertical load bearing members shall be joined at the top by a full width, steel tube to provide maximum support to the stage deck. The top of each leg assembly shall fold open and closed, rotating within 16 gauge steel saddle clips that are secured with at least four screws. Leg assemblies shall be braced by friction type braces, equipped with a spring locking device to secure the legs in the open and closed position. Braces shall be secured to the leg assembly with rivets and to the decking using a minimum of six screws and two bolts installed through the decking. It shall require only three leg assemblies to fold when opening or closing each riser unit. Legs shall open and close using only one hand. Gravity ring type brace locks are not acceptable.
LEG STRUCTURE (Dual Height)
Dual height leg assemblies are to be constructed, attached and shall fold in similar fashion to fixed height leg assemblies, but shall be constructed of 1.05" and 1.25" diameter, 14 gauge steel tubing. The leg assembly shall be constructed to allow the stage height to be positioned at two different heights having an eight inch differential. Braces shall open and close with one hand. Gravity ring type brace locks are not acceptable. Height adjustment shall be made by rotating the leg 180 degrees and engaging it into a locking stud. Stage units shall require only three leg assemblies to be adjusted to accomplish a change in height.
COUPLING
Stage units shall be equipped with drop-in type couplings that allow stage units of the same or different heights to be joined together. All couplings shall be permanently secured to each unit. Coupling devices not permanently attached are not acceptable.
METAL FINISH
All metal parts shall be thoroughly cleaned and phosphatized to enhance paint adhesion. Metal parts are to be finished with a thermofused epoxy powdercoating. All painted metal components shall be furnished in black or brown color.
ACCESSORIES
GUARD RAILS
Guard rails shall be furnished to protect the back and sides of the stage as well as both sides of any stairs to be furnished. Guard rails shall be constructed of 1¼" diameter, 14 gauge, powdercoated, steel tubing. Guard rails shall quickly attach to stages by clamping on to the frame and bolting through the decking. Bolts and threaded inserts shall be provided by the manufacturer.
STEPS
Steps shall be surfaced with slip resistant, gray polypropylene. Step units shall clamp securely to any area of the stage perimeter. Units shall have ______ levels. Each step shall be 36" wide x 12" deep and shall have a rise of 8". {OPTIONAL: Hand rails shall be provided for both sides of the step units.}
SKIRTING
Fabric skirting shall be provided to close the front and sides of each stage unit as well as the front and sides of step units. The skirting shall be durably flame resistant, 6.5 to 7 oz. per square yard, 100% polyester fabric with box pleated construction and shall have Velcroâ sown on for attachment. Adhesive backed Velcroâ shall be furnished for application to appropriate stage surfaces by the owner.
CADDIES
Caddies shall be provided to store and transport all stage units to the event location and safely hold each unit until legs are folded open and the unit is rotated to the floor. Each caddy shall be capable of holding 6 units.
WARRANTY
All stage components shall be free of defects in materials and workmanship for a period of ten years. Any defects discovered and reported in writing within the warranty period shall be corrected by the manufacturer at no cost to the owner.
